How to set up Siri shortcuts for Fluss

This guide walks you through adding your Fluss-connected device (such as a garage door, gate, or electronic door) to Siri Shortcuts in the Fluss+ app. Once set up, you can trigger your device hands-free using a custom voice phrase like "Hey Siri, open the garage" — perfect for quick access without opening the app.

Step-by-step guide

1. Open the Fluss+ app and access your devices

Open up your Fluss+ app, and tap Devices in the bottom navigation bar.

2. Select the device

Select the device you want to use with Siri Shortcuts.

3. Tap Add to Siri

Open the device's Settings page and scroll to the Add to Siri row near the bottom. Tap Add.

4. Customize the voice phrase

Now tap Change Voice Phrase to select or edit the phrase that will trigger your Fluss+ device when you speak to Siri.

Important: Your Fluss+ device must be connected to Wi-Fi for the Siri shortcut to trigger it. The shortcut sends the open command to your device over Wi-Fi — without an internet connection on the device, Siri can't reach it.

• Related Articles

• How to trigger remotely on Fluss+

  Remote triggering lets you open your gate or door from anywhere using your phone's internet connection — you don't need to be in Bluetooth range of the Fluss+ device. Before you begin Your Fluss+ device must be connected to a Wi-Fi network with ...

• What is the Fluss+ app

  If you live in a residential estate, apartment complex, or any building that uses gates, booms, or electric doors, the Fluss+ app is your all-in-one tool for managing who gets in and when — all from your smartphone. The Fluss+ app brings together two ...

• What is the Fluss+ device?

  The Fluss+ device is a small piece of hardware that connects to your existing gate motor, boom, or electric door — giving you the ability to open and control it directly from the Fluss+ app on your phone. No need to replace your existing motor or ...

• What is an API Key for Fluss+?

  An API key is a unique code that gives a third-party app or system access to your Fluss account. Think of it like a digital pass — it allows external systems to perform the same actions you'd normally do in the Fluss app (like opening your gate or ...

• Status output wire installation guide for Fluss+

  Welcome to the Fluss+ Sensor Cable wiring guide. Before proceeding with installation, please take note of the following: Important Notice: Depending on your motor type, certain Fluss+ firmware versions may produce a flicker effect while the gate is ...