Remote triggering lets you open your gate or door from anywhere using your phone's internet connection — you don't need to be in Bluetooth range of the Fluss+ device.

Before you begin

• Your Fluss+ device must be connected to a Wi-Fi network with active internet access.
• Your phone needs internet access (Wi-Fi or cellular data).

Step 1 — Locate the circular icon on the home screen

On the home screen, each device you can trigger remotely shows a circular icon on the left. If the icon isn't visible, the device likely has no internet connection.

Step 2 — Press and hold the circular icon

Press and hold the circular icon. A Slide instruction appears across the device row.

The slide-to-trigger gesture is a safety feature — it prevents the gate or device from being activated by an accidental touch.

Step 3 — Swipe left to right

Without lifting your finger, swipe the circular icon across to the right side of the row.

Step 4 — Confirmation

Once the swipe completes, a confirmation banner appears at the top of the screen showing whether the trigger was sent successfully.

If you see a Trigger failed message instead, check that your phone has active internet access (Wi-Fi or cellular data) and try again.