This guide provides detailed steps to install a sensor on your Fluss+ device, enabling it to detect whether your gate, door, or barrier is open or closed. Depending on your motor, the Fluss+ can detect the state in one of two ways: by connecting ...
Welcome to the Fluss+ Sensor Cable wiring guide. Before proceeding with installation, please take note of the following: Important Notice: Depending on your motor type, certain Fluss+ firmware versions may produce a flicker effect while the gate is ...
This guide will walk you through wiring and powering on your Fluss+ device. Tip: For motor-specific wiring diagrams and brand-by-brand installation help, visit fluss.io/installation. Prepare for installation Before you begin, make sure you have the ...
This guide explains how to install a Fluss+ sensor using the magnetic switch method. This option uses a small switch and magnet to detect whether your gate, door, or barrier is open or closed — ideal for motors that do not provide a status output ...
Most often, an installer transfers a Fluss+ device to the property owner once installation and setup are complete — but you can transfer ownership to anyone who should be the primary owner of the device. The handover is done directly from the Fluss+ ...