How to change the device Icon on Fluss+
This guide will help you update the device icon.
Before you begin
Info: Make sure you have Full Access or Owner Access to the device. Without one of these permission levels, you won't be able to make changes to device settings. For info follow this article about Access types for Fluss+.Steps to change your device icon
1. Go to Devices
From the home screen, navigate to the Devices section.
2. Select your device
Choose the device you want to update from either My Devices or Shared Fluss Devices.
3. Open Settings
Tap Settings on the device page.
4. Select Installation Type
Tap on Installation Type to open the icon options.
5. Choose your icon
Browse the available icons and select the one you want, then tap Continue.
6. Save your changes
Tap Save to apply the new icon.
You will then see the updated icon on the home page.
Related Articles
How to update the device name on Fluss+
Before getting started, make sure you have access to the device you'd like to rename. Updating the device name 1. Go to Devices From the home screen, tap Devices in the bottom navigation. 2. Select your device Tap the device you want to rename. If ...Sensor Installation Guide for Fluss+
This guide provides detailed steps to install a sensor on your Fluss+ device, enabling it to detect whether your gate, door, or barrier is open or closed. Depending on your motor, the Fluss+ can detect the state in one of two ways: by connecting ...What is the Fluss+ device?
The Fluss+ device is a small piece of hardware that connects to your existing gate motor, boom, or electric door — giving you the ability to open and control it directly from the Fluss+ app on your phone. No need to replace your existing motor or ...Magnetic switch wire installation guide for Fluss+
This guide explains how to install a Fluss+ sensor using the magnetic switch method. This option uses a small switch and magnet to detect whether your gate, door, or barrier is open or closed — ideal for motors that do not provide a status output ...How to transfer ownership of a Fluss+ device
Most often, an installer transfers a Fluss+ device to the property owner once installation and setup are complete — but you can transfer ownership to anyone who should be the primary owner of the device. The handover is done directly from the Fluss+ ...