This guide will walk you through setting up Wi-Fi on a Fluss+ device. Once your Fluss+ is on Wi-Fi you can trigger it remotely from anywhere with internet — no Bluetooth range needed.

Prerequisites

Before you start, please ensure the following:

1. You are within Bluetooth range of the Fluss+ device

   The first-time Wi-Fi setup is sent to the device over Bluetooth, so your phone must be near the device with Bluetooth turned on and permissions granted.

2. You have Owner or Full Access on the device

   See Access types for Fluss+ for what each role can do.

3. You know your Wi-Fi network's password

   The Fluss+ uses a 2.4 GHz Wi-Fi connection. The network needs to support 2.4 GHz — most home routers do.

Steps to connect to Wi-Fi

1. Open Devices from the home screen

Open the Fluss+ app. From the home screen, tap Devices in the bottom navigation.

2. Select the Fluss+ device

Tap the device you want to connect to Wi-Fi. This opens the Device Details page.

3. Tap Setup Wi-Fi

On the Device Details page, tap the Setup Wi-Fi row near the top.

Note: If Setup Wi-Fi is greyed out with an info icon, your phone isn't connected to the device over Bluetooth. Move closer to the Fluss+, make sure Bluetooth is on, and try again.

4. Pick your network

The Setup Wi-Fi sheet opens and the Fluss+ scans for nearby networks automatically. Each network shows its signal strength as Strong, Good, or Weak alongside a Wi-Fi icon. We recommend choosing a network with Strong signal.

If the list looks empty or the wrong networks appear, tap the refresh icon in the sheet header to scan again.

5. Enter the network password

Tap your network. A new sheet opens with the network's name at the top and a password field below. Type the Wi-Fi password (minimum 8 characters) into the field.

6. Tap Connect

Once a valid password is entered, the Connect button in the top right of the sheet becomes active. Tap it.

7. Wait for connection

A Wi-Fi Connected popup appears with two steps:

• Connected to [network name] — the Fluss+ has joined the Wi-Fi network.
• Online with Fluss — the Fluss+ has reached the Fluss servers and is ready for remote use.

When both steps show a green check, your Fluss+ is online.

Troubleshooting

The Setup Wi-Fi row is greyed out. Your phone isn't connected to the device over Bluetooth. Move closer to the Fluss+, make sure Bluetooth is on, and that the Fluss+ app has the necessary permissions.

No networks show up after scanning. Tap the refresh icon in the sheet header. If still empty, check that your Wi-Fi router is broadcasting on 2.4 GHz and within range of the Fluss+ device.

Connection times out / "Online with Fluss" never completes. Double-check the password you entered. If correct, the Fluss+ may have joined the network but cannot reach the Fluss servers — verify the network has internet access by testing it on another device.

Still having Wi-Fi connection problems? Please refer to Solutions for Wi-Fi disconnection problems.