Wiring
Magnetic switch wire installation guide for Fluss+
This guide explains how to install a Fluss+ sensor using the magnetic switch method. This option uses a small switch and magnet to detect whether your gate, door, or barrier is open or closed — ideal for motors that do not provide a status output ...
Status output wire installation guide for Fluss+
Welcome to the Fluss+ Sensor Cable wiring guide. Before proceeding with installation, please take note of the following: Important Notice: Depending on your motor type, certain Fluss+ firmware versions may produce a flicker effect while the gate is ...
Universal installation guide for Fluss+
This guide will walk you through wiring and powering on your Fluss+ device. Tip: For motor-specific wiring diagrams and brand-by-brand installation help, visit fluss.io/installation. Prepare for installation Before you begin, make sure you have the ...
Sensor Installation Guide for Fluss+
This guide provides detailed steps to install a sensor on your Fluss+ device, enabling it to detect whether your gate, door, or barrier is open or closed. Depending on your motor, the Fluss+ can detect the state in one of two ways: by connecting ...
Connecting Fluss+ to Nemtek Wizord 4i Energizer
This guide explains how to integrate a Fluss+ device with a Nemtek Wizord 4i Energizer using a 12V DC stepper relay (flip-flop relay). This setup allows you to remotely turn the energizer on or off via the Fluss app. Important disclaimer: Electrical ...